Installing Status Monitor 2 - Epson Stylus Color 900N User Manual

Professional series printer/print server
Hide thumbs Also See for Stylus Color 900N:
Table of Contents

Advertisement

Installing EPSON Net!2 on a Macintosh
1. Create a folder for EPSON Net!2 on your hard disk.
2. Insert the printer software CD-ROM in your CD-ROM drive.
3. Copy EPSON Net!2 to the folder you created.
After you install EPSON Net!2, use it to configure your printer for AppleTalk,
following the steps on page 44.

Installing Status Monitor 2

EPSON Status Monitor 2 is a single utility that you install in two parts. For each
system that will monitor the printer, make sure you install the network part and the
EPSON Stylus COLOR 900N part of EPSON Status Monitor 2. These two parts
work together to allow you to see your printer's status information over the network.
Status Monitor 2 lets you monitor information from the server or from any of the
workstations where you install it. It gives you ink levels in the printer and notifies you
if the printer has any problems. It does create network traffic, however, so you may
want to limit the number of users who monitor the printer.
Status Monitor 2 also includes the EPSON TCP/IP printing protocol, which allows
Windows 98 and Windows 95 users to print with TCP/IP. If you have Windows 98
or Windows 95 systems and use TCP/IP for printing, you need to install Status
Monitor 2 on each workstation that uses the printer.
You may not see screens for all the steps in this section,
depending on your computer's configuration.
Write down your settings in the spaces provided as you install
the first part of Status Monitor 2. You need to select the same
settings for the second part.
23

Advertisement

Table of Contents
loading

Table of Contents