Epson Stylus Color 900N User Manual page 27

Operating
system
DOS 6.22
Windows NT 4.0
(Service Pack 3,
or higher)
Macintosh
UNIX
IBM OS/2 Warp
* To use the Ethernet card home page, you must have TCP/IP setup on your network, as well as
either Microsoft Internet Explorer 4.0 or later, or Netscape Navigator
** If you have a Windows NT 4.0 Server network, you may need to install the driver only on the
server. See your Windows NT documentation.
20
Network
protocol What you need to install and configure
Novell DOS acts as a client only, you can't use a DOS
NetWare, workstation to monitor the printer.
Windows NT
Server,
Windows for
Workgroups
TCP/IP 1. EPSON Net!2 (page 21)
2. EPSON Status Monitor 2 (page 23)
3. IP address for the Ethernet card (page 39)
4. Printer driver on each workstation** (page 49)
NetBEUI 1. EPSON Net!2 (page 21)
(TCP/IP must
2. EPSON Status Monitor 2 (page 23)
also be
3. IP address for the Ethernet card (page 39)
installed)
4. NetBEUI settings on the Ethernet card home
page* (page 46)
5. Printer driver on each workstation** (page 49)
Novell 1. EPSON Net!2 (page 21 and page 33)
NetWare
2. EPSON Status Monitor 2 (page 23)
3. Setup using NwAdmin (page 26) or PCONSOLE
( Administrator's Manual , Chapter 4)
4. Printer driver on each workstation** (page 49)
AppleTalk 1. EPSON Net!2 (page 21 and page 44)
2. Printer driver on each system (page 49)
TCP/IP (lpr, 1. Install a printer driver and filter. (See your UNIX
ftp) documentation.)
2. Configure the printer for lpr or ftp.
( Administrator's Manual, Chapter 9)
Administrator's Manual , Chapter 8
NetBEUI
TCP/IP Administrator's Manual , Chapter 8
TM 3.0 or later.