Epson Stylus Color 900N User Manual page 112

4. Click .
Next
You see a screen similar to the following:
5. Click to copy the first diskette. You see a screen showing the progress as the
Copy
files are copied to the diskette. For multiple diskettes, when the first diskette is
finished, the installer prompts you to insert disk 2.
Make sure you label each diskette in order as you create it:
network part, disk 1 of 2
If you are making Status Monitor 2 diskettes, make sure you
label the diskettes for both parts carefully, so you do not mix
up the network diskettes and the EPSON Stylus COLOR 900N
diskettes.
6. If you have to create more than one disk, insert the next disk and click
Repeat this step for a third disk if necessary.
7. When the diskettes have finished copying, click
After you have created all the diskettes you need, you can install the software by
following the steps that start on page 107.
, etc.
Status Monitor 2,
and then click
Quit OK
.
Copy
.
105