Sending A Screen Shot; To Send A Screen Shot Directly To A Connected Computer; To Save A Screen Shot In Memory (Memory) - Casio Algebra FX 2.0 PLUS User Manual

Hide thumbs Also See for Algebra FX 2.0 PLUS:
Table of Contents

Advertisement

10-6 Sending a Screen Shot

Use the following procedures to send a hardcopy of the screen directly to a connected
personal computer (or CASIO Label Printer) or to save a screen shot in memory to send
later. Screen shots can also be sent to a CASIO Label Printer.
Use the LINK Mode set up (u3(SET UP)) to specify whether you want to send the
screen shot now or save it in memory.
H-Copy
u
• {Dirct}/{Mem} ............. {direct send}/{save}
u u u u u To send a screen shot directly to a connected computer (or CASIO Label
Printer) (Direct)
1. Connect the unit to the computer (or CASIO Label Printer).
On the computer (or CASIO Label Printer), perform the procedures required to set it up
to receive data.
2. Display the screen you want to send.
3. Press u6(H-COPY).
u u u u u To save a screen shot in memory (Memory)
1. Display the screen you want to save.
2. Press u6(H-COPY).
• You can store up to 20 screen shots in memory. Saved screen shots are automatically
assigned file names from Hcopy1 to Hcopy20.
# You cannot send the following types of
screens to a computer or a Label Printer.
• The screen that appears while a data
communication operation is in progress.
• A screen that appears while a calculation is
in progress.
• The screen that appears following the reset
operation.
• The low battery message.
10-6-1
Sending a Screen Shot
# The flashing cursor is not included in the screen
image that is sent from the unit.
# You cannot use 6mm wide tape to print a screen
shot of a graph.
19990401

Advertisement

Table of Contents
loading

Table of Contents