Download Print this page


SO O ls tvOS,, _lO
.....Make sure you read this guide
before using the camera,
..... S tore this guide safely
so that you can use it in the future.


   Summary of Contents for CANON POWERSHOT SD3500 IS

  • Page 1

    _o_o_S_o, SO O ls tvOS,, _lO RT_L _L?H Camera User Guide ..Make sure you read this guide before using the camera, ..S tore this guide safely so that you can use it in the future.

  • Page 2

    Battery Charger (with TerminaJ Cover) CB-2LYICB-2LYE _nterface CabJe AV Cabte Wrist Strap tFC-400PCU AVC°BC400 WS-BC10 Getting Started BIGtTAL CAMERA Warranty "Canon Customer BoJution Disk Card Support" Leaflet Also refer to the PDF manuals on the CD-ROM. After installation, shortcut icons appear on the desktop.

  • Page 3

    •ost s hots¸ __________________ Take some initia! test shots and play them back to make sure the images were recorded correctly. Please note that Canon inc., its subsidiaries affiliates, and its distributors are not liable for any consequential damages arising...

  • Page 4

    Shoot, leaving it to the camera to make settings ..... Shoot to match special conditions ....54 - 56 Focus on faces ......24, 60, 62, 84, 86 Shoot in places where I cannot use the flash (turn off the flash) ........

  • Page 5

    What Do You Want to Do? Look at my pictures ........Automatically play back pictures (slideshow) ....Look at my pictures on a TV ....... 114,116 Look at my pictures on a computer ...... Quickly search pictures ......106, 108 Erase pictures ........

  • Page 6: Table Of Contents

    Changing the Sound Settings ..48 Checking the Package Contents ..2 Changing the Screen Brightness ..49 Read This First ........Returning the Camera to Default What Do You Want to Do? ....4 Settings ........Conventions Used in this Guide ..8 Low Level Memory Card Formatting5! Safety Precautions ......

  • Page 7

    Table of Contents Adjusting the White Balance ... Continuous Shooting ....... Changing the Tone of a n Image (My C olors) ......... Quickly Searching Images ..... !06 Shooting Using the Two S econd Self-Timer ..80 Viewing Images in Filtered Playback ........

  • Page 8

    Conventions Used in this Guide Using Household Power ....Changing Camera Settings .... !38 Using an Eye-Fi Card ....Changing Shooting Function Troubleshooting ......Settings ........List of Messages That Appear Changing Playback Function on the Screen ......Settings ........Handling Precautions ....

  • Page 9

    Before using the camera, please ensure that you read the safety precautions described below. Always ensure that the camera is operated correctly. The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment.

  • Page 10

    If the battery charger becomes wet, unplug it from the outlet and consult your camera distributor or the closest Canon Customer Support Help Desk. Use only the specified battery charger to charge the battery. Unplug the power...

  • Page 11

    Safety Precautions Do not aim the camera at bright light sources (the sun, etc.). Doing so may cause malfunctions or damage the image sensor. allow dust or sand to enter the camera, This may cause the camera to malfunction. This is due to the high intensity of the flash burning dust and foreign...

  • Page 13: View Movies

    This chapter explains preparations before shooting, how to shoot in mode, and then how to view, erase and pdnt the images you take. The latter part of this chapter explains how to shoot and view movies and transfer images to a computer. Be sure to attach the supplied strap to the camera and wrap it around...

  • Page 14

    This camera has a touch panel screen that allows you to perform operations with the touch of your finger. Briefly touch the screen with your finger. Used for choosing icons or magnifying images. Quickly tap the screen twice. Used in PBayback mode to switch to index Display.

  • Page 15

    Use the included charger to charge the battery. Be sure to charge the battery as it is not charged at the time of purchase. . Removethe cover..v Inae the battery. Align the _ marks on the battery charger, then insert the battery by s,iding it in (#...

  • Page 16: Charging The Battery

    This is a normal characteristic of the battery and does not indicate a problem. However, if the battery beiges to the point where it will no longer fit into the camera, please contact a Canon Customer Support Help Desk.

  • Page 17: (sold Separately)

    Compatible Memory Cards tSo_d Separately) If the battery is quickly depleted even after charging, it has reached end of its life span. Purchase a new battery. compatibmeMe (Se|a SD memory cards (2 G£ and less)* SDHC memory cards (more than 2 G£, up to and including 32 G8)* SDXC memory...

  • Page 18

    Bnserting the Battery Memory Card Open the cover. G 12 :: Slide the cover and open it _ insert the battery. Insert the battery as shown until it !ocks into place with a click. Be sure to insert the battery in the correct direction or it will not properly...

  • Page 19: Inserting The Battery And Memory Card

    inserting the Battery and Memory Card Remove battery. :: Open the cover and press the battery lock in the direction of the arrow. The battery will pop up. Remove the memory card. Push the memory card in until you hear a click, then slowly release The memory card will pop up.

  • Page 20

    :::4 Complete the setting. Touch Once the date and time have been set, the Date/Time screen will close. Pressing the power button will turn off the camera. Set the correct date and time. If you have not set the date and time, the Date/ Time screen wili appear each time you turn on the camera.

  • Page 21: Setting The Display Language

    Setting the Display Language The camera has a built-in date/time battery (backup battery) that allows the date/time settings to be retained for about three weeks after the battery pack has been removed. By inserting a charged battery or connecting an AC adapter kit (sotd separately, p.

  • Page 22

    Before you use a new memory card or one that has been formatted in other devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate...

  • Page 23: Pressing The Shutter Button

    Pressing the Shutter Button Touch [OK]. To take images that are in focus, be sure to first press the shutter button lightly (halfway) to focus, then press fully to shoot. ;i[ Press halfway (lightly to focus). ---__ Press lightly until the camera beeps twice and AF frames appear...

  • Page 24

    Taking Pictures (Smart Auto) Since the camera can determine the subject and shooting conditions, can let it automatically select the best settings for the scene and just shoot. The camera can also detect and focus on faces, setting the co_or and brightness to optimaB levels.

  • Page 25

    Taking Pictures tSmart Auto) -_ Choose a subject to focus on. Touch the screen to choose the person or location to focus on (Touch AF). The camera will beep and _ _ wi!l appear on the screen.......................... Focus. Press the shutter button halfway to focus.

  • Page 26: Taking Pictures (smart Auto)

    Taking Pictures {Smart Auto) The camera displays an icon for the scene it has determined and then automatically focuses and seJects the optimum settings for subject brightness and color. icon Background CoKor Gray Light Blue Orange Dark Btue * Appears when the scene is dark and the camera is attached to a tripod.

  • Page 27

    Taking Pictures {Smart Auto) What if white and gray frames appear when you point the camera toward a subject? When faces are detected, a white frame appears on the face of the main subject, while gray frames appear on other detected faces, The frames wil! follow the subiects within a certain range (p, 84).

  • Page 28

    You can view the images you have taken on the screen. Enter Playback mode. Press the [] button. The last image you took will appear. Choose image. Dragging horizontally across the screen from left to right will cycle through images in the reverse order they were taken, from the newest...

  • Page 29

    Viewing Images Pressing the shutter button halfway while in Prayback mode switches the camera to Shooting mode. When an image is displayed, lightly tapping the camera as shown below will switch to the next image. Switch to next image Switch to previous image If you touch and hold 4 at the left of the screen and tilt the camera as shown while switching through images, the images advance quickly.

  • Page 30

    You can choose and erase images one at a time. Please note that erased images cannot be recovered. Exercise adequate caution before erasing image..Enter Playback mode. Press the [] button. The last image you took will appear. Choose image erase.

  • Page 31

    The camera can automatically select all settings so that you can shoot movies just by pressing the shutter button. ff you continue shooting for a long time, the camera may become warm. This is not a malfunction......................_J Enter _,_,mode. Set the mode switch to _,_,_ Shooting Time...

  • Page 32

    Shooting Movies Recording will start, and [@ Rec] and the Elapsed Time elapsed time wl[[ appear on the screen. Once shooting begins, take your finger off the shutter button. If you change the composition of your shot during shooting, the focus will stay the same, but the brightness and tone will...

  • Page 33

    You can view the movies you have shot on the screen..Enter PJaybaek mode. Press the DE] button. The last image you shot will appear. appears on movies. Choose a movie......Drag horizontally across the screen choose a movie to play back. _J PJay the movie.

  • Page 34: Viewing Images

    viewi. You can use the included software to transfer images you have shot with the camera to a computer for viewing. If you are already using ZoomBrowser EX/ImageBrowser, instalt the software from the included CD-ROM, overwriting your current installation. Windows Windows 7 Windows Vista (including Service Pack 1 and 2) Windows XP Service Pack 2, Service Pack 3...

  • Page 35: Transferring Images To A Computer For Viewing

    Transferring images to a Computer for Viewing Windows Vista and Mac OS X (v10=5) are used for these explanations= install the Software. Windows .._,I_Z'_;_v_ _. Place the CD in the computer's ..CD-ROM drive. Place the supplied CD=ROM (DiGiTAL CAMERA Solution Disk) (p.

  • Page 36

    24 Turn on the camera. Press the F_ button to turn on the camera. Open CameraWindow. Windows _;_A.,: Click [Downloads Images From Canon Camera using Canon CameraWindow]. CameraWindow wil! appear. <_i BfCameraWindow does not appear,...

  • Page 37

    Transferring images to a Computer for Viewing Click [import Bmages from Camera], then click [Bmport Untransferred Images]. All images not previously transferred will transfer to the computer. Transferred images will be sorted by date and saved in separate folders in the Pictures folder.

  • Page 38

    Supplied with Camera Wrist Strae D GITAL CAMERA Bai_e_ Pack NB-6L" Battery Charger WS-DC10 Solution Disk 4Ath Terminal Cover CB-2LY/CB-2LYE AV Cable AVC=DC4OO '_terface CaMe IFC-4OOPCU "AEso available for purchase separatety. Memory Card Card Reader Windows/Macintosh Compact Photo Printers Inkjet Printers (SELPHY series) (P_XMA series)

  • Page 39

    The following camera accessories are sold separately. Some accessories are not sold in some regions, or may no longer available. AC Adapter Kit ACKoDC40 This kit lets you power the camera using household power. Recommended powering the camera for an extended period of time or when connecting to a computer...

  • Page 40: Accessories

    Separately Sold Accessories Canon-Brand PietBridge Compliant Printers By connecting your camera to a Canonobrand PictBridge compliant printer, you can print SELPHY series your images without having to use a computer. For more information, visit your nearest Canon retailer. PIXMA series...

  • Page 41

    This chapter explains the parts of the camera and what appears on the screen, as well as the basic operating instructions.

  • Page 42: Shooting Movies

    @®®®® ® _ Zoom Lever @ Strap Mount (p. 13) Shooting: E_3(Telephoto) /[] (Wide @ AN OUT (Audio/Video Output) / Angle) (p. 24) DIGITAL Terminal (pp. 36, 114, 132) @ Lens Playback: C[ (Magnify) / _ (Index) (pp. !06, 112) @ Lamp (pp.

  • Page 43

    DtSP°. You can change the screen dl_sp_ay by touching Refer to p. 162 for detai_s on information that appears on the screen_ No Information Display )n Display Simple Information Detaited Information Focus Check Display Display (p. 111) Display...

  • Page 44: Indicator

    Indicator The display automatically brightens when shooting in dark conditions, allowing you to check the composition (Night Display function). However, brightness of the image on the screen, and the brightness of the actual image recorded may be different. Screen noise may appear and the movement of the subject...

  • Page 45

    Commonly used shooting functions can be set with the FUNC. menu. menu items and options differ depending on the mode (pp. 164 - 165). _1 Display the FUNC. menu. FUNC.. Touch *) Choose a menu..Drag vertically up or down the menu to the left, or touch a menu item to choose You can also choose menu items by...

  • Page 46

    Various functions can be set from the menus. The menu items are organized under tabs, such as for shooting and playback (F_). The available menu items differ depending on the mode (pp. 166 - 169). Display the menu. MENU. Touch FUNC, then touch 2 Choosea tab.

  • Page 47: Menu - Basic Operations

    MENU = Basic Operations Choose an option. For items that display 4 _ to the left and right, touch to change settings. For items that display a bar, touch the spot on the bar where you want to make the setting. Complete the setting.

  • Page 48

    You can silence or adjust the volume of camera sounds. i_ Display the menu. MENU. Touch FUNC. then touch Choose [Nute]. Touch the ?T tab. Drag vertically up or down the screen choose [Mute], then touch to choose [on]. Display the menu. MENU.

  • Page 49

    You can change the screen brightness. i_ Display the menu. MENU= Touch EUNC., then touch :_) Choose [LCB Brightness]....Touch the _1' tab. Drag vertically up or down the screen to choose [LCD Brightness]. J Change the brightness. Touch the point on the bar where you want to change the brightness.

  • Page 50: Settings

    When you have mistakenly changed a setting, you can reset the camera the default settings. _1 Display the menu. MENU. Touch FUN(:. then touch fi) Choose [Reset AH]....Touch the 71' tab. Drag vertically up or down the screen touch [Reset All].

  • Page 51

    Perform low level formatting when you think that the recording/reading speed of a memory card has dropped. Performing a Iowdevel format on a memory card erases all data on the memory card. As you cannot retrieve erased data, exercise adequate caution before performing a Iowdevel...

  • Page 52

    To save battery power, the camera shuts down automatically when it is not operated for a certain time. powor sov .g d ..ogs.oot ng The screen will turn off approximate}y 1 minute after the camera is last operated. After about 2 more minutes, the lens wil! retract and the power will turn off.

  • Page 53

    This chapter explains how to shoot in different conditions, as well as how to use common functions, such as the self4imer. _!_'_!!'_°_ • When you choose a Shooting mode that matches a particular set of conditions, the camera will automatically select any necessary settings.

  • Page 54

    The camera will select the necessary settings for the conditions in which you wish to shoot when you choose the matching mode..........................Set the mode switch to _ (p. 42). Choose the desired shooting mode. Touch Touch 4 _ or drag quickly across screen horizontally...

  • Page 55: Shooting In Various Conditions

    Shooting in Various Conditions _Take snapshots at n{ght (Night Snapshot) Lets you take beautiful snapshots of city nightscapes or people against night backgrounds. Bfyou hold the camera firmly, you can take pictures with reduced camera shake, even without a tripod. _Take shots of kids and pets (Kids&Pets)

  • Page 56

    Shooting in Various Conditions _Take shots of foliage (Foliage) :: Lets you shoot trees and leaves, such as new growth, autumn Jeaves or blossoms, in vivid colors_ '_}_Take shots of peopJe in snow (Snow) Lets you take bright, naturaloCO_ored shots of people against snowy backgrounds.

  • Page 57

    You can add various effects to images when shooting, Sheet with tJ (Fish-eye Effect} Lets you shoot with the distorting effect of a fish=eye lens. Choose _,,_. Choose in Steps 1 = 2 on p, 54. *) Choose an effect......

  • Page 58: Adding Effects And Shooting

    Adding Effects and Shooting Take shots _Miniature Effect} Blurs chosen portions in the top and bottom of an image to produce effect of a miniature model. ,,,j Choose _. Choose in Steps 1 = 2 on p. 54. A white frame (the area that will not be blurred) appears on the screen.

  • Page 59

    Adding Effects and Shooting SpeCial EffeCts _Creative Light displays, and other points of light in nighttime backgrounds behind your subject can be changed into any of six predetermined shapes. Be sure to use the flash when shooting, _1 Choose Choose _'# in Steps 1 = 2 on p, 54.

  • Page 60: Detecting A Smile And Shooting

    Detecting a Smile and Shooting The camera will shoot even without pressing the shutter button each time it detects a smile. Choose Choose in Steps 1 - 2 on p. 54, then touch Touch 2_, then touch :_:X The camera will enter shooting preparation.

  • Page 61

    Point the camera at the subject and press the shutter button fu!ly. The camera will shoot approximateBy two seconds after it detects a wink. _iJ Choose _. ,, Choose in Steps 1 - 2 on p, 54, then touch "L_. Touch ¢t_, then touch !2).

  • Page 62: Using The Face Self-timer

    Using the Face Self=Timer After touching ¢_ on the screen in Step 1, touch ._v to change the number of shots. Touch _ to comprete the setting. To take a photo that includes the photographer, such a group photo, compose the shot, and press the shutter button.

  • Page 63

    Using the Face Serf-Timer iJ Join the subjects and Rook at the c_m_ra. When the camera detects a new face, the lamp and sound will speed up (the lamp remains lit when the flash will fire), and two seconds _ater the shutter witl re_ease.

  • Page 64

    You can shoot with the flash turned off. _j Touch Choose _. Touch Touch _) again to make the setting, Once set, _ will appear on the screen. To turn the flash back on, follow the steps above to return the setting to _A When you press the shutter button halfway in low Jight conditions where camera shake is likely, a flashing...

  • Page 65: (digital Zoom)

    Digitamzoom You can use the digital zoom to zoom up to a maximum equivalent of 20x and capture subjects that are too far away for the optical zoom to enlarge. The images may appear coarse, however, depending on the recording pixel setting (p.

  • Page 66

    Zooming in Closely on Subjects (Digital Zoom} !!i_ !iiiiiiiili!iiiiiiii!!iiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiii_i_i_i_i_i_i_i_i_i_i_iiiiiiiiiiiiiiiiiii i¸_ ii'i'i'i ii!!iii ii_/i/Itii i'ii/i/!! iiii!!/i!ii!/i!i i i//_'__i!_ The focal length of the lens can be increased by an equivalent of 1.7x or 2.1x_ This enables a faster shutter speed and less chance of camera shake than the zoom (including...

  • Page 67

    You can insert the shooting date and time in the lower right corner of an image. Once inserted, however, they cannot be deleted. Be sure to check beforehand that the date and time are correctly set (p. 143). Choose [Date Stamp]. MENU, Touch FUN(:.,...

  • Page 68

    The selfotimer can be used to shoot a group photo that inc}udes photographer. The camera will activate approximately 10 seconds after the shutter button is pressed, _j Touch _F..Touch _:i_) • Touch (i_) again to make the setting. Once set, d_ will appear on the screen.

  • Page 69

    In this chapter you will learn how to use the various functions in p mode to progressively advance your shooting skills. TMs chapter assumes that the mode switch is set to _ and the camera in P mode. stands for Program Before attempting to shoot using a function...

  • Page 70

    You can choose the settings for various functions to suit your preferences. AE stands for Auto Exposure. _m Set the mode switch to _ (p. 42). Choose P..Choose P in Step 2 on p. 54. djust the settings according your purposes (pp.

  • Page 71: Adjusting The Brightness

    (ExF You can adjust the standard exposure set by the camera in 1i3ostop increments in the range of -2 to +2. 'i_ Enter Exposure Compensation mode. Touch ;) Adjust the brightness..While watching the screen, touch the point on the Exposure Compensation bar where you want to make a setting,...

  • Page 72

    When it is difficult to focus because your shot contains subjects that are both near and far, you can change the focus range (the distance range from your subject) to focus more reHaMy. Choosea Focus Range. Touch FUNC., then drag vertica!_y up or down the menu on the left to choose Choose an option.

  • Page 73

    ch,. i.g {i_age Size) You can choose from six recording pixels (image size) settings. 1} Choose the recording pi×el setting. Touch FUN(:., then drag vertically up or down the menu on the left to choose t_ Choose an option..Touch an item you want to set.

  • Page 74

    2700 1403 5746 4320 x 2432 I29I 2873 11766 The vatues in the table are measured according to Canon standards and may change depending on the subject, memory card and camera settings. S Suitable for sending images as e=mail attachments.

  • Page 75

    q Choose the ISO speed. Touch FUNC,, then drag vertically up or down the menu on the left to choose [_ R_8, _) Choose an option..... ,, Touch an item you want to set. If you drag vertically up or down the menu to the right, other items will appear.

  • Page 76

    The white balance (WB) function sets the optima! white balance for natural looking colors to match the shooting conditions. ;_ Choose the white balance function. Touch FUN([., then drag vertically up or down the menu on the left to choose AWB.

  • Page 77

    Adjusting the White Balance You can adjust the white balance to the light source at the shooting Iocation. Make sure that you set the white balance under the light source of the actual scene you will shoot. in Step 2 on p. 76, choose _md.

  • Page 78

    You can shoot continuously at a maximum speed of approximately images/second while the shutter button is pressed fully and held. ;I Choose a Drive mode. Touch FUNC., then drag vertically up or down the menu on the left to choose [:Z.

  • Page 79

    Changing You can change the tone of an image to sepia or black and white when shooting= t} Choose My Colors. Touch rUNG., then drag vertically up or down the menu on the left to choose t_FF. t_) Choose an option..

  • Page 80

    Using the Two Second Self=Timer Shooting The contrast, sharpness, color saturation, red, green, blue, and skin tones in an image can be chosen and set at 5 different levels. Follow Step 2 on p. 79 to choose d 0 . Touch on the right side of the screen.

  • Page 81

    You can set the time delay (0 - 30 seconds) and the number of shots (1 - 10 shots). Choose Touch _iF'F and _c, then immediately touch "_ [Settings]_ 1:) Choose the settings....Touch to choose a value for the desired option.

  • Page 82

    While you keep the shutter button pressed halfway, the focus and exposure are Iocked. You can now recompose and shoot. This is called Focus Lock. _iJ Focus. Center the subject you want in focus, and press the shutter button halfway. Confirm that the AF Frame is green.

  • Page 83

    This chapter serves as the advanced version of Chapter 4 and explains how to take pictures using various functions. This chapter assumes that the mode switch is set to _ and the camera in _ mode. The sections "Shooting Long Exposures" (p.

  • Page 84

    You can change the AF (Auto Focus) frame mode to match the conditions you want to shoot. Choose [AF Frame]. MENU Touch FUNC. then to choose tab. Touch [AF Frame], then touch to choose an option. Detects people's faces and sets the focus, exposure (evaluative metering...

  • Page 85

    Magnifying the Focal Point A singBe AF frame wi}l be used. This is effective for focusing on a specific point. Touch EUNC., then MENU to choose the _ tab, then touch [AF Frame Size] and choose [Small] The setting is configured to [Normal] when the Digital Zoom (p.

  • Page 86

    Choosing the Subject to Focus On (Touch ¢hoosi.g {Touch You can choose a specific subject or person's face, or a location on the screen, to focus on and shoot. _t Choose the subject, face or Roeation to focus on. Touch the subject or person shown on the...

  • Page 87

    Shooting with the AF Lock Touch operations on faces or subiects appearing outside the border will not work. They witl work if the face or subject move inside the border. Shooti. The focus can be locked. After locking the focus, the focal distance will not change...

  • Page 88

    While the shutter button is pressed halfway, the focus and exposure will continue to adjust, al!owing you to take pictures of moving subjects without missing a shot. Choose [Servo AF]. MENU Touch FUNC., then and choose the _ tab and touch [Servo AF], then touch 4 _ to choose...

  • Page 89

    You can change the Metering mode (brightness measuring function) match the shooting conditions. ;,I Choose the Metering mode. Touch FUNC., then drag vertically up or down the menu on the left to choose C_]. _) Choose an option....Touch an item you want to set. Touch the item you chose again complete...

  • Page 90

    You can lock the exposure and shoot, or set the focus and exposure separately to shoot. AE stands for "Auto Exposure" ;I Lock the exposure. Point the camera toward the subject touch the bottom part of the screen (inside the frame shown on the left) wMle pressing the shutter...

  • Page 91

    (i°Contrast) The camera can detect areas in the scene, such as faces or backgrounds, that are too bright or dark and automatically adjust them to the optimum brightness when shooting. Also, when the overall image is lacking contrast, the camera will automatically correct the image for a sharper impression...

  • Page 92

    You can automatically correct red-eye that occurs in images taken with the flash. Choose [Flash Settings]. MENU Touch FUN(Z. then and choose the _ tab and touch [Flash Settings]. E:) Adjust the setting..Touch [Red-Eye Corr.], then touch 4 _ to choose [On].

  • Page 93

    You can make the main subject, such as people, appear bright by having camera provide the appropriate illumination with the flash. At the same time, you can use a slow shutter speed to brighten the background that the light from the flash cannot reach.

  • Page 94

    You can set the shutter speed to a range between 1 and 15 seconds shoot long exposures. However, you should attach the camera to a tripod to prevent the camera from moving and blurring the image. _j Choose *_. Choose *_ in Steps 1 = 2 on p= 54_ Choose the shutter...

  • Page 95

    You can change the look of an image when shooting. However, depending on shooting conditions the image may become coarse, or the coJors may not come out as expected. You can choose to retain a single coJor and change the rest to black and white in a composition.

  • Page 96

    Changing the Color Shooting You can swap one color in an image for another when recording it, You can only swap one color, Choose !s. Fotlow Steps 1 = 2 on p= 54 to choose 2 Touch /....The unchanged image and the Color Swap image wil_ both display.

  • Page 97

    Disclaimer Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. Canon reserves the right to change the contents of this guide at any time without prior notice= Illustrations and screenshots...

This manual also for:

Ixus 210, Digital elph

Comments to this Manuals

Symbols: 0
Latest comments: