Canon POWERSHOT SD400 DIGITAL ELPH User Manual page 84

©
SeeSelecting Menus and Settings (p. 48).
Youcan shoot the image right after selecting
settings by pressingthe shutter button.The
menudisplays again after the shot, allowing
you to changethe settings easily.
in _ or L_ mode, you can change the
resolution (p. 65) and frame rate (p. 85).
Pressthe FUNC./SET button.
The display will return to the shooting
screen and the icon of the selected movie
mode will appear in the LCD monitor.
Press theshutterbutton halfway.
The camera will automatically set the
exposure, focus and white balance.
Presstheshutterbutton fully.
* Shooting and sound recording starts
simultaneously.
, During shooting the recording time (in
seconds) and a red circle appear on the
LCD monitor.
82