Canon POWERSHOT SD400 DIGITAL ELPH User Manual page 109

Aim the camerasothat the desired
colorappearsat the centerof the
LCDmonitorand pressthe ÷
button.
Only one color can be specified.
• You can shoot immediatelyafter this step.
The screen will reappearafter the shot
allowing you to changethe settings and
shoot again. /
@
i ==""""°°
I The color input mode will no longer be in =
effect, g
Pressthe FUNC./SET button.
I The display will return to the shooting
......................................................... _ ........................................................................... J screen. ...........................
___ i;iiiiiiiiiiiiiiiiiiiiiiiiiiii _iiiiiiiiiiii[diiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
', The default setting for color swap mode changes green into white.
,, Youmay not obtain the expected results after color input mode if you
use the flash, or change the white balance or metering settings.
,, The colors specified in the color swap mode are retained even if the
camera's power is turned off.
107