Canon POWERSHOT A3100IS User Manual page 63

Using the Face Se|f-Timer
To take a photo that includes the photographer, such a group photo,
compose the shot, and press the shutter button. The camera will shoot two
seconds after you enter the shot and it detects your face (p. 78).
_ Choose ""
@ Follow Steps 1 - 2 on p. 55 and choose _.
2 Compose the shot and press the
shutter button halfway.
@ Make sure a green frame appears on the
face focused on and white frames appear on
other faces.
Press the shutter button fully.
_. The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
_. The lamp will blink and the self-timer sound
will play.
4 Join the subjects and look at the
camera.
_. When the camera detects a new face, the
lamp and sound will speed up (the lamp
remains lit when the flash will fire), and two
seconds later the shutter will release.
@ To cancel the countdown after the timer has
started, press the v button.
®
Changing the number of shots
For the screen in Step 1, press the DISP. button, then press the 4F
buttons to change the number of shots. Press the Q button to accept the
setting.
;f _ Even if Your face iSnot detected after joining the subjects the shutter will
iI _ release approximately 15 seconds later.
63