Canon POWERSHOT SD750 DIGITAL ELPH User Manual page 115

Troubleshooting
Power is not turned on. ePress the power button (Basic Guide
p. 11).
Memory card slot/battery
cover is open.
Battery charge insufficient
to operate camera
("Change the battery
pack" message displays).
Poor contact between
camera and battery
terminals.
oConfirm that the memory card slot/
battery cover is securely closed
(Basic Guide p. 7).
• Insert a fully charged battery into the
camera (Basic Guide p. 7).
oUse the AC Adapter Kit ACK-DC10
(sold separately) (p. 131).
' oPolish the terminals with a soft
cotton swab before charging or
using the battery (p. 127).
The camera's horizontal/ oThe camera's orientation
vertical orientation was mechanism is operating. There is no
The SD memory card's
and SDHC memory
card's write protect tab is
set to "Write protect".
oWhen recording to, erasing from or
formatting the memory card, slide
the write protect tab upward (p. 129).
m,
The built-in rechargeable oRecharge the built-in battery
lithium battery charge is immediately (Basic Guide p. 9).
low.