Table of Contents
Advertisement
1 20 1
Various Shooting
Methods
Changing the Save Method for the Original Image
When shooting still images in the Color Accent or Color Swap mode,
you can set whether or not to save the original image as well as the
transformed
one.
1. Press the _
button.
2. In the [r_"l] menu, use the 41,or
,I, button to select [Save Original].
1. Use the ÷ or "l, button to select
[On] or [Off].
2. Press the _
button.
[_]
hen [Save Original] is Set to [On]
- Only the transformed
image displays in the LCD monitor
while shooting in the Color Accent or Color Swap mode.
- The transformed
image is reviewed in the LCD monitor
after shooting in the Color Accent or Color Swap mode.
If you erase the image at this point, the original image is
erased along with the transformed
image. Exercise
adequate caution before deleting a file.
- The images are numbered
consecutively. The original
images are assigned the lower number and the
transformed
color accent or color swap images the next
number.
- Since two images are recorded with each shot, the
number of shots remaining is approximately
half the
number displayed when this function is set to [Off].
Advertisement
Table of Contents
