Table of Contents
Advertisement
1841
The camera moves when
® Confirm the procedures
in
the shutter button is
"[]
appears" (p. 162).
pressed.
AF-assist Beam is set to
® tn dark places where it is difficult for
[Off].
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate
it (p. 53). Take care not to obstruct
the AF-assist Beam with your hand
when used.
Subiect is ou{ of focai
¢ Shoot will1 tlie subiect at tlie correct
range,
focusing range (p. 206).
®The camera may be set to an
unintended function (such as Macro).
Cancel the setting.
The subject iS hard to focus e Use flie focus lock or AF lock to ..........
on.
shoot (p. 94).
Insufficient light for
® Set the flash to []
(Flash on) (p. 64).
shooting.
The subject is
® Set the exposure compensation
to a
underexposed
because the
positive (+) setting (p. 97).
surroundings
are too bright.
® Use the AE Lock or spot metering
functions (pp. 95, 98).
Subject is too far away for
® Shoot with the subject within the
flash to reach,
correct flash range when using the
built-in flash (p. 207).
® Raise the ISO speed and then shoot
(p. 71).
Advertisement
Table of Contents
