Windows System Requirements
To use your printer and its software, your system should have:
®
An IBM
compatible PC with at least a 486/66 MHz (for Windows 98),
®
Pentium
133 MHz (for Windows 2000), or 486/25 MHz (for Windows 95
or Windows NT
Microsoft Windows 95, Windows 98, Windows NT 4.0, or Windows 2000
At least 16MB (for Windows 95, 98, or NT 4.0) or 32MB (for
Windows 2000) of RAM (32MB for Windows 95 or 98, or 64MB for
Windows NT 4.0 or 2000 recommended)
At least 50MB of free hard disk space (100MB recommended)
VGA, Super VGA, or better display adapter and monitor
Double-speed (2
recommended) for installing the printer software
For parallel connection: a high-speed, bidirectional, IEEE-1284 compliant
parallel cable (6 to 10 feet long); the cable must have a D-SUB, 25-pin, male
connector for your computer and a 36-pin, Centronics
for the printer.
For USB connection: an EPSON
®
4.0) processor (Pentium or higher processor recommended)
) CD-ROM or DVD drive (quad-speed [4
x
®
USB/Parallel Adapter cable.
4
] or faster
x
®
compatible connector