Problems With Paper Feeding - Epson Stylus COLOR 480SX Printer Basics Manual

You see incorrect characters.
Make sure the printer cable is securely connected and that the cable meets the
system requirements on page 4.
Make sure your printer is selected in your application or as the Windows
default printer.
If you're using a switch box with your printer, connect the printer directly to
your computer and try printing again.
Your printout is grainy.
Try using a higher quality paper.
Set the Quality/Speed slider to
Run the Print Head Alignment utility. See page 24 for instructions.
You may need to increase the image resolution or print it in a smaller size; see
your software documentation.

Problems with Paper Feeding

Too many copies are printing.
Make sure the
Copies
both set for multiple copies.
Paper doesn't eject fully or is wrinkled.
If the paper doesn't eject fully, you may see a paper jam error window on your
screen. Click the
on-screen instructions to remove jammed paper.
The problem may be caused by an incorrect paper size setting. Be sure to select
the correct paper size in your application or printer software.
Check to make sure you've left enough room at the front of the printer for
paper to eject easily.
If it's wrinkled when it ejects, the paper may be damp or too thin.
Quality
settings in the printer software and your application aren't
button to eject the paper. If it doesn't eject, follow the
Eject
in your printer software; see page 11.
38