Problems And Solutions; Problems Setting Up The Printer Or Installing Software - Epson Stylus COLOR 480SX Printer Basics Manual

Printer basics
Hide thumbs Also See for Stylus COLOR 480SX:
Table of Contents

Advertisement

Problems and Solutions

Here are some basic troubleshooting tips if you have any problems setting up your
printer, installing software, getting good print quality, feeding paper, or other
miscellaneous problems. For additional tips, see your electronic Reference Guide as
described on page 7.
Problems Setting Up the Printer or Installing
Software
The printer started making noise after ink cartridge installation.
The first time you install ink cartridges, the printer must charge its ink delivery
system for about two minutes. Wait until charging finishes before sending a
print job. If you unplug the printer while it's charging, it may not charge
properly and use more ink than necessary the next time you plug it in.
Make sure the ink cartridge clamps are locked down completely and that no
packing material remains in the printer. Unplug the printer, wait a few
seconds, then plug it in again to resume printing.
You're having problems installing the printer software.
Carefully follow the instructions on the Start Here sheet.
Make sure your printer cable is securely connected to the printer and
computer.
Make sure you've closed all other applications, including any screen savers and
virus protection software. Then try uninstalling and reinstalling the printer
software.
You're printing over a network.
See your electronic Reference Guide for instructions on configuring your printer
for use on a network.
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus color 480/480sx

Table of Contents