Cashier Key Method ([Clk] Key); Cashier Reports; Training; Operation For Training Mode Start - TEC MA-1350-1 SERIES Owner's Manual

NOTES: 1. No receipts are issued on turning ON or OFF a Cashier Key. However, the Cashier Code (1
to 4) is printed near the bottom of every receipt to be issued.
2. The multi-drawer feature can be adopted on this cashier-identifying method. In this case,
Drawer 1 is assigned to cashiers 1 and 2, and Drawer 2 to cashiers 3 and 4.

4) Cashier Key Method ([CLK] Key)

A maximum of 8 cashier keys ([CLK 1] to [CLK 8]) can be installed on the keyboard.
Sale entries will be possible only when one of the [CLK] keys is depressed (in "REG", "MGR", or " - " mode).
When the same [CLK] key is again depressed, the cashier will go in Cashier OFF status.
NOTES: 1. No receipts are issued on turning ON or OFF a Cashier Key. However, the cashier code (1 to
8) or cashier name is printed near the bottom of every receipt to be issued.
2. When adopting this cashier-identifying method, it is recommended to select the program
option to display cashier code instead of department code. (Ask your TOSHIBA TEC repre-
sentative.)
3. The multi-drawer feature can be adopted on this cashier-identifying method. In this case,
Drawer 1 is assigned to cashiers 1 and 2, and Drawer 2 to cashiers 3 to 8.

Cashier Reports

By adopting the Cashier Identifying option, Daily Cashier Read and Reset Reports (for individual cashiers)
and Periodical Cashier Read and Reset Reports (for all the cashiers together in one report) are available. For
the report taking operations and print format, see Chapter 3 on page 4 in Manager's Guide.

12. Training

This chapter describes a training provided for new employed cashiers. After entering the training mode, a cash-
ier may operate the same transaction entries as those in the REG mode. The data in the training mode is not
processed, therefore not affect any actual sales data in business.
• Turn the Control Lock to the SET position using the MA key.
• In the operation patterns,
of a transaction key.

Operation for Training Mode Start

9 9 ST
indicates an input through a numeric key, and
................................ A training start receipt is issued.
- 19 -
EO1-11126
MA-1350-1 SERIES
indicates a depression