TEC MA-1350-1 SERIES Owner's Manual page 20

EO1-11126
MA-1350-1 SERIES
5
Insert the paper end into the receipt inlet behind
the printer. Then, feed the paper by hand into the
inside of the printer while pressing the [RF] key
VALI
DATE
provided at the central upper side of the keyboard
TX
M
until about 4 inches (about 10 cm) of paper comes
out of the printer.
6
Cut the excess paper with the attached cutter, and
attach the Printer Cover.
After closing the Printer Cover, depress the [#/NS]
key to check print condition.
- 13 -