Advertisement
Eject Button
The EJECT button is used to open the disc tray so you can install or remove a disc
Busy Indicator
When you install a disc into the DVD-ROM drive, the BUSY light flashes slowly as it
attempts to locate the disc. One of the following will occur:
•
•
•
•
Emergency
The emergency eject hole is to be used only when the DVD tray will not open when
Eject Hole
EJECT button is pressed.
DVD Tray
Insert DVD Disc in tray
BUSY light goes out. The DVD-ROM drive is ready to read data from the disc.
BUSY light flashes slowly. The disc may be dirty.
BUSY light remains ON. The DVD-ROM is accessing data.
BUSY light remains ON indefinitely. The DVD-ROM is experiencing an error.
Advertisement
