Download  Print this page

Drive Connectors - Toshiba SD-R1612 User Manual

Cd-rw/dvd-rom combo drive
Hide thumbs

Advertisement

DRIVE CONNECTORS –SD-R1612
Figure 1.SD-R1612 Combo Drive Rear Panel - Connectors
Power
Power is supplied to your Combo drive by the connection with your computer's +5V/+12V
power cable to the power socket at the back of drive. One side of the plug has chamfered
Connector
edges, so the power connector fits only one way.
CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in
upside-down with power ON.
Audio
Supplies Analog and Digital sound to your system.
Connectors
The SD-R1612 DVD drive is connected to your computer system through the ATAPI
ATAPI
connector.
Connector
The mode select jumpers are 6 straight angle pins located on the rear of the DVD drive.
Mode Select
By placing a jumper on the pins, you can select the following functions: CL (CSEL), SL
Jumper
(Slave) or MA (Master). (see Setup for additional information).
13

Advertisement

loading

  Related Manuals for Toshiba SD-R1612