Epson 1280 Printer Basics Manual page 57

Epson owner's manual printer stylus photo 1280
Hide thumbs Also See for 1280:
Table of Contents

Advertisement

Paper doesn't feed correctly or jams
in the printer.
If paper doesn't feed, remove it
from the sheet feeder, reload it
against the right edge, then slide the
left edge guide against the paper.
If multiple pages feed at once,
remove the stack from the sheet
feeder, fan the edges to separate the
sheets, and carefully reload it.
If paper jams, press the
b
maintenance button for several
seconds to clear the jam. If that
doesn't work, turn off the printer
and gently pull the paper forward
(toward the output tray) to pull it
out. Reload the paper and press the
b
maintenance button.
If you try to print while the
b
maintenance light is on, your
paper won't feed properly. Press the
b
maintenance button to turn off
the light before you print.
If your paper loads incorrectly or jams
frequently:
Use new, smooth, high-quality
paper, loaded printable side up.
Don't load paper above the arrow
mark on the left edge guide.
Place the paper against the right
edge and slide the left edge guide
against it, but not too tightly.
Roll paper doesn't feed correctly.
To load paper correctly, gently hold
the paper in place with your hand
while you press the z button.
Don't force the paper to feed into
the printer. Allow it to feed
automatically.
Use a triangle or other tool to
make sure the end of the roll is cut
perpendicular to the edges. If the
end is cut on a diagonal, the paper
may not feed smoothly.
If you see a paper jam error
message, press the z roll paper
button for at least three seconds to
clear the error.
If the
b
maintenance light is on,
press the
b
maintenance button
and wait for the light to go off.
Then press the z roll paper button
to resume printing.
Always select
Roll Paper
Paper Source setting. If
(or
Feeder
Auto Sheet Feeder
is selected, paper will feed
unnecessarily after each print job.
In addition, a great deal of paper
may feed unnecessarily when you
turn your printer off and then on
again.
as the
Sheet
)
Problem Solving
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents