Removing And Installing Ink Cartridges - Epson Stylus Photo 1400 User Manual

Removing and Installing Ink Cartridges

Be sure you have a new ink cartridge before you begin. Once you start replacing a
cartridge, you must complete all the steps in one session.
Caution:
Leave the expended cartridge installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
To ensure good results, use genuine Epson ink cartridges and do not refill them. Other
products may cause damage to your printer not covered by Epson's warranty.
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
1. Make sure the CD/DVD tray is not inserted in the printer.
2. Make sure the printer is turned on, but the green P power light is not
flashing.
3. Open the printer cover.
4. Press the H ink button. The P power light begins to flash.
Caution:
Don't hold down the H ink button for more than 3 seconds or the printer will start to
clean the print head.
If one of the cartridges is low or expended, the print head moves that cartridge
to the _ mark. Go to step 5.
If no cartridges are low or expended, the cartridge holder moves directly to the
ink cartridge replacement position. Go to step 6.
Replacing an Ink Cartridge
53