Labels - GE 45608 Manual

• To turn a SCENE off, press and release the CH - key for less
than one second. The screen will display OFF above the
selected SCENE.
Removing a Device (Node / Light) From a Scene
This only removes the device from a specific scene. The device is
still part of your home control network and the scene still exists (if
there is more than one device in the scene).
1. Enter Z-Wave setup mode and highlight
SCENE SETUP
2. Press OK; the screen will display ADD
3. Press the right arrow key once; the screen will display REMOVE.
4. Press OK; the screen will display SEL DIGIT
5. Press a digit (1-9) for the scene you wish to add the device to.
Press SHIFT and the digit (1-9) if you are adding devices to
scenes 10 through 18. The screen will display the scene you've
chosen.
6. Press OK; the letter "W" will be displayed in the upper left hand
corner and the Z-Wave light will begin blinking indicating the
remote is waiting to remove your device.
7. Press the button on the device so it communicates with the
remote.
8. When the screen displays SUCCESSFUL you have successfully
removed the Node/Light from the scene.
Deleting a Scene
This only deletes the specific scene. All of the devices are still part
of your home control network.
1. Enter Z-Wave setup mode and highlight SCENE SETUP
2. Press OK; the screen will display ADD
3. Press the right arrow key twice; the screen will display DELETE.
4. Press OK; the screen will display SEL DIGIT
5. Press a digit (1-9) for the scene you wish to add the device to.
Press SHIFT and the digit (1-9) if you are adding devices to
scenes 10 through 18. The screen will display the scene you've
chosen.
6. Press OK; the screen will display SUCCESSFUL to indicate that
the scene has been deleted.

Labels

Individual LIGHTS, GROUPS and SCENES can all be labeled to help
identify their function or location in your home. The process is the
same for all three.
32