Table of Contents
Advertisement
1. Make sure that the printer is on, but not printing. Then, open
the printer cover.
2. Press down the
head moves left to the Ink cartridge replacement position. The
P
power light begins to flash, and the
to flash or remains on. To discover which cartridge requires
replacing, refer to the table below, or check EPSON Status
Monitor 3 (for Windows) or EPSON StatusMonitor (for
Macintosh).
Lights
b
.
b
.
b
O
O = on, N = off, . = flashing
c
3. Lift up the ink cartridge clamp as far as it will go. Take the
cartridge out of the printer. If the cartridge is empty, dispose
of it properly. Do not take the used cartridge apart or try to
refill it.
4. Remove the new ink cartridge from its protective bag and
then only peel off the yellow tape seal. Do not touch the green
chip on the side of the cartridge.
14
e
ink cartridge replacement button. The print
Action
Replace the black ink cartridge if the
flashes at the same speed as the power light.
Black ink cartridge:
T007 (Standard capacity)
T010 (Light capacity)
Replace the color ink cartridge if the
flashes at twice the speed of the P power light.
Color ink cartridge: T008
Replace both the black and color ink cartridges if
this light remains on.
Caution:
Do not move the print head by hand, as this may damage the
printer. Always press the
button to move it.
b
error light begins
e
ink cartridge replacement
b
error light
b
error light
Advertisement
Table of Contents
