Command Table - BenQ RS232 Commands Manual

4. Command Table

*Note: The available commands are different by model. (ex: source,
audio settings, aspect ratio..etc), please refer to the user manual for the further information.
Function Type
Write
Power Write
Read
Write
Write
Write
Write
Write
Write
Source Write
Selection Write
Write
Write
Write
Write
Read
Write
Write
Read
Write
Audio Control Write
Read
Write
Write
Read
Write
Write
Write
Audio source
Write
select
Write
Write
Write
Operation
Power On
Power off
Power Status
COMPUTER/YPbPr
COMPUTER 2/YPbPr2
Component
DVI-A
DVI-D
HDMI
HDMI 2
Composite
S-Video
Network
USB Display
USB Reader
Current source
Mute On
Mute Off
Mute Status
Volume +
Volume -
Volume Status
Mic. Volume +
Mic. Volume -
Mic. Volume Status
Audio pass Through off
Audio-Computer1
Audio-Computer2
Audio-Video/S-Video
Audio-Component
Audio-HDMI
Audio-HDMI2
4
ASCII
<CR>*pow=on#<CR>
<CR>*pow=off#<CR>
<CR>*pow=?#<CR>
<CR>*sour=RGB#<CR>
<CR>*sour=RGB2#<CR>
<CR>*sour=ypbr#<CR>
<CR>*sour=dviA#<CR>
<CR>*sour=dvid#<CR>
<CR>*sour=hdmi#<CR>
<CR>*sour=hdmi2#<CR>
<CR>*sour=vid#<CR>
<CR>*sour=svid#<CR>
<CR>*sour=network#<CR>
<CR>*sour=usbdisplay#<CR>
<CR>*sour=usbreader#<CR>
<CR>*sour=?#<CR>
<CR>*mute=on#<CR>
<CR>*mute=off#<CR>
<CR>*mute=?#<CR>
<CR>*vol=+#<CR>
<CR>*vol=-#<CR>
<CR>*vol=?#<CR>
<CR>*micvol=+#<CR>
<CR>*micvol=-#<CR>
<CR>*micvol=?#<CR>
<CR>*audiosour=off#<CR>
<CR>*audiosour=RGB#<CR>
<CR>*audiosour=RGB2#<CR>
<CR>*audiosour=vid#<CR>
<CR>*audiosour=ypbr#<CR>
<CR>*audiosour=hdmi#<CR>
<CR>*audiosour=hdmi2#<CR>