Software Status Setting; Baud Rate; International Character Set - Epson P07303 User Manual

5.7. Software Status Setting

When system POWER ON, there is no need to turn off to modify Command Type, Baud Rate, Parity,
Demo Mode and International Character. To re-set DIP Switch to various Command Type under
the following list of Command to modify the setting. The setup value will stored in the EEPROM.
When DIP Switch is OFF. Next time the system POWER ON previous setup value will be the
default value and no need to modify.

5.7.1. Baud rate

STX 05 B n ETX
ASCII Format STX 05 B n ETX
Dec. Format [02][05][66] n [03]
Hex. Format [02h][05h][42h] n [03h]
Description Change the display communication baud rate. The baud rate setting can be

5.7.2 International character set

STX 05 S n ETX
ASCII Format STX 05 S N ETX
Dec. Format [02][05][83] n [03]
Hex. Format [02h][05h][53h] n [03h]
Description Change the display international character font .A total of 16 different character
/Set baud rate and keep it with EEPROM/
selected from 4800 to 38400.
N
30h
31h
32h
33h
/Change international character set/
fonts to select from. The setting function will be saved to EEPROM.
30h n 34h
Baud rate
4800
9600
19200
38400
30h n 3fh
9