Care And Cleaning - GE Monogram ZBD6800K Owner's Manual

Exterior
Interior
Protect
Against
Freezing
The Air
Gap
To clean the control panel use a lightly dampened cloth then dry thoroughly. To clean the
exterior painted panels use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
The stainless steel panels can be cleaned with CERAMA BRYTE
Cleaner or a similar product using a clean, soft cloth. You can order CERAMA BRYTE
Steel Appliance Cleaner through GE Parts by calling 800.626.2002 (for U.S. only). In Canada, call
1.888.880.3030.
The stainless steel used to make the dishwasher tub and inner door provides the highest reliability
available in a GE dishwasher. If the dishwasher tub or inner door should be scratched or dented
during normal use, they will not rust or corrode. These surface blemishes will not affect their
function or durability.
If your dishwasher is left in an unheated place during the winter, ask a service technician to:
1. Cut off electrical power to the dishwasher. Remove fuses or trip circuit breaker.
2. Turn off the water supply and disconnect the water inlet line from the water valve.
3. Drain water from the water inlet line and water valve. (Use a pan to catch the water.)
4. Reconnect the water inlet line to the water valve.
An air gap protects your dishwasher against
water backing up into it if a drain clogs. The air
gap is not a part of the dishwasher. It is not
covered by your warranty. Not all plumbing
codes require air gaps, so you may not have one.
The air gap is easy to clean.
1. Turn off the dishwasher and lift off the
chrome cover.
2. Unscrew the plastic cap and clean with
a toothpick.

Care and Cleaning

Dishwasher
®
Stainless Steel Appliance
Two types of
air gaps
Check the air gap any time your dishwasher
isn't draining well.
®
Stainless
15