Dialing Back; I F You Programmed Your Local Area; I F You Did Not Program Your Local - GE 29897 User Manual

You can also erase all Caller ID records, leaving any associated message.
• Press REVIEW when reviewing the first Caller ID record; the unit displays START OF LIST .
Then press DELETE, and the unit displays ERASE ALL CALLS? Press DELETE again to
erase all Caller ID records. OR
• Press NEXT when reviewing the latest Caller ID record; the unit displays END OF LIST .
Then press DELETE, and the unit displays ERASE ALL CALLS? Press DELETE again to
erase all Caller ID records.
D B
IALING ACK
When reviewing Caller ID records, you may dialback the phone numbers shown on the
display by pressing the dial button.
I
F YOU PROGRAMMED YOUR LOCAL AREA CODE IN THE SETUP MENU
1. Use the NEXT and REVIEW buttons to scroll to the number you want to dial.
• If you see a number with 7 digits (i.e. 555-1234), then the call was received from within
your area code. However, this does not guarantee the call is a local call.
• If you see a number with 11 digits (i.e. 1-234-555-1234), then the call received was not
from your area code.
2. Press the dial button and the display shows PICKUP or ADJ. A 10 second timer also starts
in the upper right side of the display, letting you know the time remaining until the unit
returns to the Summary Screen. If you adjust the number to be dialed, the timer
automatically resets itself.
3. To adjust the phone number, press the dial button. For instance, a 7-digit local number
sometimes cannot be dialed because it requires a 10-digit or 11-digit format. Press the
dial button repeatedly to scroll through the 7, 10, and 11-digit numbers.
7-digits: 7-digit telephone number (i.e. 555-5555)
10-digits: 3-digit area code + 7-digit telephone number (i.e. 425-555-5555)
11-digits: long distance code 1 + 3-digit area code + 7-digit telephone
number (i.e. 1-425-555-5555)
4. To dial the displayed number, pick up the handset or press the SPEAKER button before the
timer reaches 0. NOW DIALING shows in the display and the number is dialed.
I
F YOU DID NOT PROGRAM YOUR LOCAL AREA CODE IN THE SETUP MENU
1. Use the NEXT and REVIEW buttons to scroll to the number you want to dial. You will only
see 10-digit numbers (i.e. 234-555-1234).
2. See steps 2 through 4 in the above section to complete the dial back sequence.
20