Auto Shut-Off Function - GE 169233 Manual

Auto shut-off function

• If the iron is not moved for a certain period of time, it will shut off automatically.
After shut off, the iron will cool and the fabric setting display (7) and color-changing
•
indicator (13) will flash slowly in the corresponding color. The buzzer will beep six
times.
• Tilt the iron down and back to restart the iron in the previous setting.
• The iron is equipped with a motion sensor. If the iron keeps idle for a certain amount
of time, the buzzer will beep six times to warn you of a potential danger:
position
On soleplate
On the side
On the heel
Press the fabric setting button (7) to restart the iron in the previous setting.
•
• Memory settings are lost after turning the iron off or disconnecting from the wall
outlet.
Turning the iron off and emptying the water reservoir
Press the fabric setting button (7), until
•
the wall outlet.
• Turn the function knob
• disconnect the iron from the wall outlet.
• Wait until the iron has cooled completely.
Place the iron on its soleplate (14) on a flat, dry and level surface. Press the function
•
(4) to open the fill inlet cover (2) (ill. a ).
knob
Hold the iron upside down over a sink to empty the water reservoir (12).
•
Store the iron on its heel (10) in a safe place (ill. d ).
•
Iron-169233-05 (GB).indd 11
OPERATION
illustration Time
30 seconds
30 seconds
15 minutes
is displayed. disconnect the iron from
(4) left to the dry ironing
11
beeps
6x
6x
6x
position (ill. g ).
1/11/10 9:59 AM