Table of Contents
Advertisement
6 C
CHAPTER
The Adapter Board (S5U1C8F360Z1) can be used as an evaluation board by connecting it with the user
target board.
(1) To operate the microcomputer on the Adapter Board, the user must provide the peripheral circuits.
Refer to "Basic External Wiring Diagram" in the "S1C8F360 Technical Manual" for the required circuits.
(2) Use the supplied I/O cables (80-pin/40-pin
ing between the S1C8F360 Adapter Board (S5U1C8F360Z1) and the target system.
(3) Be sure to turn the power off before connecting the target system because the I/O cable includes a
power line (V
).
DD
CN1
CN2
CN3
S5U1C8F360Z1 MANUAL
(ADAPTER BOARD FOR S1C8F360/8F361)
ONNECTING WITH THE
2 flat type and 60-pin/30-pin
I/O cables
mark
Fig. 6.1 Connecting with the target system
EPSON
CHAPTER 6: CONNECTING WITH THE TARGET SYSTEM
T
ARGET
S
YSTEM
2 flat type) for connect-
CN1-1
(40 pins)
CN1-2
(40 pins)
CN2-1
(40 pins)
CN2-2
(40 pins)
CN3-1
To target board
(30 pins)
CN3-2
(30 pins)
7
Advertisement
Table of Contents
