Download Print this page

Getting Started On A Macintosh; Setting Up The Computer - Epson 400, 600, 640, EX, 700, 800, 850, 1520, 3000 User Manual

Usb/parallel adapter
Hide thumbs

Advertisement

If you have any problems installing the cable or software, contact your
EPSON dealer or EPSON technical support as described in the Where to
Get Help section of your printer documentation.

Getting Started on a Macintosh

The instructions on the next few pages explain how to connect the USB/
Parallel Adapter cable to your iMac or G3 and how to install the printer
software that came on the USB Printer Software CD-ROM.
IMPORTANT:
To connect an EPSON Stylus Pro 5000 or 9000 to your Macintosh using the
adapter, install the software that came with your printer instead of the
software included in this kit. See your printer's setup instructions.
For all other printers, you must use the USB Printer Software CD-ROM
included in this kit. Follow the instructions below.

Setting Up the Computer

If you have an iMac, you may need to update your system before installing
the EPSON USB/Parallel Adapter.
If your iMac is running OS 8.1, you must install Apple's iMac Update 1.0.
If your iMac is running OS 8.5 or 8.5.1, Apple recommends that you
install iMac Update 1.1.
2

Advertisement

loading

  Also See for Epson 400, 600, 640, EX, 700, 800, 850, 1520, 3000

  Related Manuals for Epson 400, 600, 640, EX, 700, 800, 850, 1520, 3000