Enabling And Disabling Fibre Channel Ports; Enabling And Disabling Physical Ports (Oneconnect Adapters Only) - Emulex ProLiant BL620c - G7 Server User Manual

Enabling and Disabling Fibre Channel Ports

Using the Port Information tab you can enable or disable FC ports. When you disable an FC port, you
disable all functions for the port. Disabled ports appear in the discovery-tree with a red X.
To enable or disable an FC port:
1. In the discovery-tree, select the FC port you want to enable or disable.
2. Select the Port Information tab.
3. Click Enable Port or Disable Port.

Enabling and Disabling Physical Ports (OneConnect Adapters Only)

Using the Physical Port Info tab you can enable or disable the physical port. When you disable a
physical port, you disable all functions, such as iSCSI and NIC, for the port. Disabled ports appear in the
discovery-tree with a red X.
Note: You cannot disable a port if PXE Boot is enabled or any if the iSCSI target sessions
are boot sessions.
To enable or disable a physical port:
1. In the discovery-tree, select the physical port you want to enable or disable.
2. Select the Physical Port Info tab.
3. Click Enable Port or Disable Port.
The OneCommand Utility User Manual Page 104