To Install Your Vac Drum Onto The Caddy - Craftsman 113.177060 Owner's Manual

4.Position thedovetail portion o fone of
thewheel assemblies into theacces-
sory caddy a sillustrated. Tap the wheel
support into theaccessory caddy w ith a
soft m allet. Repeat forthesecond
wheel assembly.
5.Turn theaccessory caddy u pright.
This completes theassembly ofyour16
gallon w eVdry vacaccessory caddy.
The caddy i snow ready t oinstall thesix-
teen gallon d rum ofyourCraftsman wet/
dry vac.
To Install Your Vac Drum Onto
the Caddy
1. Place the caddy (now fully assembled)
in the upright position (all four wheels
positioned on the floor).
2. Locate the drain on your wet/dry vac
drum. When the drum is positioned into
the vac caddy, the drain must be cen-
tered between the two front dual wheel
casters. There are two mounting posts
in the caddy that must press into the
mounting holes of the drum (see illus-
tration). When properly oriented, the
drum may be pressed down and a
small tab located in the caddy will snap
into the drum below the drain. A distinct
snap will be heard indicating you have
completed the caddy assembly.
NOTE: Since your wet/dry vac caddy is
designed for permanent attachment to the
drum, it is not necessary to remove the
vac from the accessory caddy when dis-
posing of debris.
Drum
,,Drain
Mounting
Caddy ! II / Post
7