Advertisement
PULLDOWN
LEFTHAND SIDE)
iNSTALL
CHEST
ON CABINET
With the help of another person, install chest on top of
cabinet inside of the 4 corner stays. The chest will stay
securely atop the cabinet under its own weight.
To replace drawers
Empty drawer. Extend the drawer slides from the tool
chest. Insert the brackets on each side of the drawer into
the slots in the cabinet slides, being careful that they are
properly positioned. Once properly inserted, completely
close the drawer to set the slides in their proper positions.
OPERATION
RAISE AND RELEASE
DRAWER
FRONTS:
These units are equipped with the raise and release drawer
fronts. To close, shut the drawer firmly until the latch en-
gages. If the drawer does not stay closed, the hook may
be bent, or it may rub against the drawer slides. To fix this
problem, lightly bend the hook until the drawer will engage
in the slide.
I
I
I
I
I
I
I
To remove drawers
Empty drawer. Pull drawer out to almost full extension.
Push up on right hand black release lever, while pulling
down on left hand black release lever. While holding the
levers in the positions as instructed above, pull the drawer
outward until it is released from the drawer slide.
PUSH UP
(RIGHT HAND SIDE)
CRAFTSMAN
THREE
YEAR LIMITED
WARRANTY
FOR THREE YEARS from the date of purchase, this
product is warranted against any defects in material or
workmanship.
With proof of purchase, a defective part will
be replaced free of charge. If a replacement
part is unavail-
able, the product will be replaced with one of equal value.
This warranty does not apply to a product that is
damaged or altered through misuse, abuse, accident,
neglect, modification or mishandling.
For warranty coverage details, visit the web site:
www.craftsman.com
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
Sears Brands Management
Corporation,
Hoffman Estates, IL 60179
REPLACEMENT
PARTS
Refer to product illustration and parts list for parts
locations and numbers. To order replacement parts, call
1=800=4MY=HOME ® (1=800=469=4663}.
For replacement keys: key codes are printed on the face
of the locks.
Advertisement
