Contens Of Hardware Pack; Assembly; Chure Deflector Installation; Tools Required For Assembly - Craftsman 247.796893 Owner's Manual

CONTENTS OF HARDWARE PACK
BOLTS
1/4÷20 x 1/2" Long
' 4EXLOGKNUTS ,
114-20 Thread
FIGURE 1
ASSEMBLY
I_ NOTE
This unit is shipped WITHOUT GASOLINE
or OIL. After assembly, see operation
section of this manual for proper fuel and
engine oil recommendations.
:- NOTE
The right a_d left' side of your chipper-
shredder is determined from behind the
unit.
Hex Bolts
Hex Lock Nuts
Chute
Deflector
,/
FIGURE 2
KEEPERS
INSTRUCTIONS
UNPACKING
Rembve_thechipper:Shredder and loose parts from
the carton, Make certain ail :parts and literature have
been removed before the car ton is discarded.
• =
Parts in Carton: ,,
Chippnr-ShrP-dder, _ _ ..... '; "
Chute Deflector
Hopper
Upper Leaf Ramp Section
Catcher Bag
Hardware Pack
Safety .Glasses " :.... "
Tools Required for Assembly:
(2) 7/16" Open End of Box Wrenches*
(!) 1/2" Socket Wrench
* An Adjustable Wrench may be used in place of one
of the wrenches.
CHUTE DEFLECTOR INSTALLATION
1: Place the chute deflector in position on the
discharge opening (on the left side of the
chipper-shredder). See figure 2,
2, Secure chute deflector to discharge opening
with four hex bolts (1/2" long) and 1/4" hex lock
nuts. Heads of the hex bolts are inside the
discharge opening. Hex nuts go on the outside.
3, Tighten all four nuts and :bolts securely.