Problem Solving; What To Do When The Lights Come On Or Flash - Epson 400 Series User Manual

Epson user's guide home theater projector 400 series
Hide thumbs Also See for 400 Series:
Table of Contents

Advertisement

Problem Solving

This section explains how to interpret the projector's status lights, solve problems with the
picture and remote control, and contact technical support.
What To Do When the Lights Come On
or Flash
The lights on top of the projector indicate the projector's
status and let you know when a problem occurs.
If the projector isn't working correctly, first press the
button or the
Power
P
control, let it cool down, turn off the power switch on the
back, and unplug it. Then plug the power cord back in
and turn on the projector. If this doesn't solve the
problem, check the status lights on top of the projector.
Light state
P power light does not
come on
P power light is orange
P power light is flashing
green
P power light is flashing
orange and you can't turn
the projector on or off
button on the remote
Off
Cause and solution
Make sure the power switch on the back of the projector
is turned on and the power cord is connected securely
both at ends.
The projector is in standby mode. Turn off the power
switch in back to turn off the projector, or press the
P
Power button to turn it on.
The projector is warming up. Wait for the picture to
appear.
The projector is cooling down. Wait until the light stops
flashing and shines orange. Then turn off the power
switch in back to turn off the projector, or press the
Power button to turn it on.
P
Power light
Warning light
Problem Solving
55

Advertisement

Table of Contents
loading

Table of Contents