12. When done making your settings, highlight the
top of the screen, then press
again and press
Enter
Screen.
Understanding the Notification Messages
If a projector experiences a problem, it sends an e-mail message to
each of the addresses you provided using EMP NetworkManager. The
message includes the heading "EPSON Projector" in the subject line.
The body of the message contains:
the name of the projector
the projector's IP address
a description of the problem
The problem descriptions are similar to the errors reported by EMP
Monitor:
Internal problem
Fan-related problem
Sensor problem
Lamp timer failure
Lamp burned out
Lamp cover open
Overheating (projection turned off automatically)
High-speed cooling in progress (the projector is getting too hot
but continues to operate)
Lamp replacement notification (the lamp is nearing the end of its
life)
If a plus (+) sign appears before the description, it indicates that a
problem has occurred. A minus (–) sign appears when the problem
goes away or is resolved.
. Highlight the
Enter
to return to the main EasyMP Network
button at the
OK
button
OK
note
If a projector develops a
critical problem, it may not
be possible for it to report the
error.
25