Air Filter & Pre-Cleaner; Air Filter Removal & Installation - Craftsman ZTS 7500 Operator's Manual

Zero-turn rear engine riders with electric start
Hide thumbs Also See for ZTS 7500:
Table of Contents

Advertisement

Available languages

Available languages

AiR FILTER & PRE-CLEANER
Service interval: Pre-Cleaner: Every 25 hours or as
required. Air Filter: Every 50 hours or as required.
Replacement
interval: Pre-Cleaner: As required. Air
Filter: Every 200 hours or once per season.
Air Filter
Removal
& Installation
1. Lift up on the bottom of the latch (A, Figure 28 or 29)
and flip the latch away from the cover.
2. Remove the cover (B). Remove the filter (C, Figure
27) and pre-cleaner (D).
3. Install the pre-cleaner (D) with the mesh side up.
Install the filter (C) as shown.
4. Install the cover (B, Figure 29) making sure the tabs
are inserted into their slots. Secure with the latch (A).
Figure 28. Air Filter Assembly - Briggs & Stratton
Single Cylinder Models
A. Air Filter Latch
B. Air Filter Cover
®
Figure 29. Air Filter Service = Briggs & Stratton
Single Cylinder
Models
A. Air Filter Latch
B. Air Filter Cover
C. Air Filter
D. Pre=Cleaner
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

107.27786

Table of Contents