Running The Debugger; Figure 2-34 Setting Break Points; Figure 2-35 Running The Program - Fujitsu FR Family FR60 Lite User Manual

2.2.5

Running the debugger

As shown in "Figure 2-34 Setting break points", you can set break points to lines with a green round mark
on the left side in the source file. Note that you cannot set break points while the program is running.
As shown in "Figure 2-35 Running the program", click the "Run Continuously" icon to run the program.
Click this to set a break point.
To cancel the break point, click this again.

Figure 2-34 Setting break points

Figure 2-35 Running the program

- 58 -
AN07-00180-3E