Replacing Ink Cartridges - Epson Stylus CX8400 Series Quick Manual

Note:
We recommend that you use genuine Epson cartridges and do not refill them. The use
of other products may affect your print quality and could result in printer damage.
Yields vary considerably based on images printed, print settings, paper type, frequency
of use, and temperature. For print quality, a small amount of ink remains in the cartridge
after the "replace cartridge" indicator comes on.
For best printing results, use up a cartridge within six months of opening the package.

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
Note:
Leave the expended cartridge installed until you have obtained a replacement, or the ink
remaining in the print head nozzles may dry out.
1. Turn on the CX8400 Series.
2. If an ink cartridge is low or expended, you see a
message on the CX8400 Series display screen. Note
which cartridges need to be replaced and press
If a cartridge is expended, you must replace it to be
able to print. If a cartridge is low, you can continue
printing until a cartridge needs replacement.
If you're replacing a cartridge before you see a
message on the CX8400 Series display screen, press
Maintenance
.
OK
, and press . Then select
OK
.
OK
, select
Setup
Change Ink Cartridge
Replacing Ink Cartridges
and press
33