The Functions; Selecting And Setting Functions - Yamaha YPT-420 Owner's Manual

The Functions

The "Functions" provide access to a range of detailed instrument parameters for tun-
ing, setting the split point, and adjusting the voices and effects. Take a look at the func-
tion list starting on the opposite page. There are 54 function parameters in all.
When you locate a function you want to set up, simply select the function's display
name (shown to the right of the function name in the list) and adjust as required.

Selecting and Setting Functions

1
Find the function you want to set in the
list that begins on page 83.
2
Press the [FUNCTION] button.
StyleVol
100
3
Select a function.
Press the CATEGORY [ ] and [ ] buttons as
many times as necessary until the function's
display name appears in the display.
Transpos
82
YPT-420 Owner's Manual
00
The selected function.
4
Use the dial, the [+] and [-] buttons, or
the [0]–[9] number buttons to set the
selected function as required.
The [+] and [-] buttons are used to make ON/
OFF type settings: [+] = ON, [-] = OFF.
In some cases the [+] button will initiate execu-
tion of the selected function, and the [-] will
cancel the selection.
• Decrement value by 1.
• OFF
• Cancel
Press simultaneously to
recall the default setting.
Some function settings are stored in memory as
soon as they are changed. See "The Backup
Parameters" on page 56 for information on the
function settings that are stored on the instru-
ment. To restore all initial factor default set-
tings perform the "Backup Clear" procedure
described in the "Initialization" section on page
56.
Direct numeric
entry.
• Increment value by 1.
• ON
• Execute