Epson Stylus CX9475Fax Start Here Manual page 14

Configuring the Print Server with Advanced
Installation
Follow these steps to configure the print server using custom settings:
Note:
If you're installing the all-in-one in an Ad Hoc environment, see "Configuring the Print
Server and Installing Software for Ad Hoc Mode" on page 15.
1. When you see this window, select
2. Select
Wireless
3. Select
Easy Installation
DHCP) or
4. Do one of the following:
■
If you chose to configure the address manually, you see a configuration
window. Enter the IP address, subnet mask, and default gateway.
■
If you chose to configure the address automatically, continue with the
next step.
5. Select your wireless network, then click
6. If you see the Network Security settings screen, enter your security key and
click
Next
7. Confirm your network settings, then click
8. Follow the on-screen instructions to complete the installation.
9. When you're done, remove the CD.
You're ready to print, copy, scan, and fax. See your Quick Guide or on-screen
User's Guide.
14
Install Software and Set Up the Print Server
or and click
Wired
to configure the IP address automatically (using
Advanced Installation
.
Advanced Installation
.
Next
to configure it manually, and click
.
Next
.
Next
and click .
Next
.
Next