Network Test
You can test or confirm the network connection status after setting up the network.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
2.
Press the ▲ or ▼ button to select "Network Setup", then press the
ENTER
button.
3.
Press the ▲ or ▼ button to select "Network Test", then press the ENTER
button.
The current network settings will appear.
➣
Press the EXIT button to exit.
BN68-01429C-Eng.indb 86
button.
English - 86
Language
: English
Time
Network Setup
V-Chip
Caption
External Settings
Entertainment
: Off
Energy Saving
: Off
PIP
SW Upgrade
Network Setup
Internet Protocol Setup : Auto Setup
Network Test
Move
Enter
Network Test
MAC Address
IP Address, Subnet, Gateway, DNS Server
Gateway Ping
Domain Ping
Your network is operating properly. If you still have a
network problem, contact your network service
provider.
2008-02-26 ¿ÀÈÄ 5:14:40
►
►
Return
Return