Rules For Safe Operation - Craftsman 315.117151 Owner's Manual

FULL ONE YEAR WARRANTY ON CRAFTSMAN BELT SANDER
ff this Craftsman Belt Sander fails to o gn ive completa satistaction within one year from the date of purchase, RETURN
IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will repair it. flee of charge¸
If this Craftsman Belt Sander is used for commercial or rental purposes, this warranty applies for only 90 days from
the date of purchase,
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state¸
Sears, Roebuck and CO.1 DEPT. 817 WAI Roffman Estates, IL 60179
INTRODUCTION
DOUBLE INSULATION is a concept in safety, in electric
power tools, whk:h eliminates the need for the usual three
wire grounded power cord and grounded supply system.
Wherever there is electric current in the too{ there are two
complete sets of insulation to protect the user, A{] exposed
metal pads are isolated from internal metal motor compo-
nents with protecting insulation.
GENERAL
IMPORTANT - Servicing of a tool with double insulation
requires extreme care and knowledge of the system and
should be performed only by a qualified service technician.
For Sewice we suggest you return the tool to your nearest
Se_rs Store for repair. Always use original factory replace-
ment parts when servicing.
Your Craftsman Belt Bander is suitable for coarse, medium and fine sanding of wood, metals, plastics and other materials. It
is ideal when used for smoothing rough boards, chamfering, rOunding edges and many other general Sanding applications.
It is alsO an excellent tool for removing paint, varnishes, and stains, Its balanced design makes it easy to use.
RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS
1. KNOW YOUR POWER TOOL - Read owner's
manual carefully. Learn its applications and limi-
tations as well as the specific potential hazards
related to this tool,
2. GUARD AGAINST ELECTRICAL SHOCK BY
PREVENTING BODY CONTACT WITH
GROUNDED SURFACES. For example: Pipes,
radiators, ranges, refrigerator enclosures.
3. KEEP GUARDS IN PLACE and in working order.
4. KEEP WORK AREA CLEAN, Cluttered areas
and benches invite accidents,
5, AVOID DANGEROUS ENVIRONMENT, Don't
use power tool in damp or wet locations or ex-
pose to rain, Keep work area well lit.
6. KEEP CHILDREN AND VISITORS AWAY. All
visitors should wear safety glasses and be kept a
safe distance from work area, DO not let visitors
contact tool or extension cord.
7. STORE IDLE TOOLS, When not in use tools
should be stored in a d_, high or locked*up place
- out of the reach of children.
8, DON'T FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
9. USE RIGHT TOOL. Don't force small tool or at-
tachment to do the job of a heavy duty too[ Don't
use tool for purpose not intended o for example -
Don't use a circular saw for cutting tree limbs or
logs,
Page 2