BATTERY
REPLACEMENT
l WARNING:
To avoid
electric
shock,
disconnect
the test
leads
from
any source
of voltage
before
removing
the battery
cover.
I
1.
The E_ icon will appear when battery voltage is low.
2.
Turn the Function dial to the OFF position.
3.
Disconnect
the negative
(common) test lead from the meter.
4.
Fully retract the positive test lead probe.
5.
Remove the Phillips head screw at the rear center of the meter
housing.
6.
Remove the battery compartment
cover to access the batteries.
7.
Replace the two (2) 1.5V 'AAA' batteries observing
polarity.
8.
Secure the battery compartment
cover.
WARNING:
To avoid electric shock, do not operate your meter
until the rear battery cover is in place and fastened securely.
UL LISTED
The UL mark does not indicate that this product has been
evaluated for the accuracy of its readings.
J
14