Tools Required - Craftsman 536.797571 Owner's Manual

ASSEMBLY
TOOLS REQUIRED FOR ASSEMBLY
2 - 1/2 inchWrenches (Oradjustablewrenches)
2 - 9/16 inchWrench ( or adjustablewrenches)
2 - AdjustableWrenches
1 - Knife
1 - Regular Screwdriver
Figure 1 shows the edger/trimmercompletelyas-
sembled.
Referenceto the right and lelt hand side of the edger/
trimmeris from the operator'spositionbehindthe unit.
TO REMOVE EDGER/TRIMMER
FROM CARTON
• Remove the lower handle from the carton.
• Remove the controlrod from the carton,
• Removethe upperhandle and packing materialfrom
the carton.
• Remove wheels, parts bag and packing material
from the carton.
• Cul down all tour corners of the carton.
• Remove packing from edger/trimmerblade.
FIG. 1
I
CAUTION: ALWAYS WEAR SAFETY
GLASSES OR EYE SHIELDS WHILE
ASSEMBLING EDGER/TRIMMER.
6