Fujitsu TeamPoS 7000 User Manual page 45

THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
TeamPoS7000_User Guide_D900000454.pdf
Revision 1.0 - March 6, 2012
• If the unit becomes unusually hot, or produces smoke or an unusual
smell, turn off the power immediately and contact the maintenance
personnel. Failing to do so may present a risk of electric shock or fire.
• Do not remove covers fastened with screws since doing so may
present a risk of electric shock, burns or other injury.
• Do not place any heavy objects on the unit. If the objects are not
balanced they may fall, resulting in injury.
• Do not leave the unit in a location subject to high temperatures, such
as a location exposed to sunshine or the interior of a parked car, for an
extended period. The heat may deform or melt the cover, or increase
the temperature of unit's internal parts to the point where it presents a
risk of fire.
• Do not touch the keyboard when replacing the paper roll since doing
so may activate the printer and trap your clothing or hair.
• Do not insert your fingers into the printer paper insertion opening
when replacing the paper roll since, doing presents a risk of trapping
your finger.
• Do not touch the print head immediately after printing since doing
presents a danger of burns.
• Firmly insert the plug into the wall socket. Failure to do may present a
risk of fire or malfunction.
• Keep the magnetic card clean. Do not inject oil into the magnetic card
reader. If dust, oil or water adheres to the card, this may cause an error,
a malfunction, or degradation of the magnetic head.
• Keep the control unit panel closed. If the panel remains open, it may
be damaged when the door is opened/closed.
• Always turn off the power before cleaning the unit.
• Always unplug the power cord from the wall socket before relocating
the equipment. Remove any cables that are connected. Take great care
whenever you move the unit. Failure to do so may cause damage to the
power cable, presenting a risk of fire or electric shock, or may cause
the unit to fall, resulting in injury.
Appendix - vii