Specifications - Fujitsu fi-553PR Operator's Manual

6. Specifications

Item
Printing Method
Print Timing
Printing Characters
Maximum number of
characters per line
Font orientation
Character size
Character pitch
Font Style
Character width
Document that can be
scanned
Printing area
Accuracy of Printing
position
Dimension
Weight
Ambient condition
Consumable
14 |
Thermal inkjet printing
Post printing
Alphabet : A to Z, a to z
Numeric Characters : 0, 1 to 9
Symbols : ! " $ # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }¯
40 characters (When using 8 digits counter: 43 characters)
Normal: 0º, 180º (horizontal), 90º, 270º (vertical)
Narrow: 0º, 180º (horizontal)
Normal : Height 2.91 × width 2.82mm / 0.1146 × 0.1110 in (horizontal),
Height 2.82 × width 2.91mm / 0.1110 × 0.1146 in (vertical)
Narrow: Height 2.91 × width 2.12mm / 0.1146 × 0.0835 in (horizontal)
3.53mm (Normal), 2.54mm (Narrow)
Regular, Bold
Normal, Narrow
Documents supported by fi-5530C
For the details, please refer to "fi-5530C Image Scanner Operator's Guide"-"Chapter 6 Document
Specification for the ADF."
●
Documents with glossy surface such as thermal paper, thermal transfer paper, coated
ATTENTION
paper and art paper, take longer time for the ink to dry and may cause poor print quality.
The Imprinter must be cleaned more frequently if you use these types of papers.
●
Very thick paper or plastic document cannot be scanned when the imprinter is installed.
A = 5mm
B = 5mm
C = 5mm
D = 5mm
±4mm from the starting point for feeding direction
Without Scanner : 399(W) × 302(D) × 151(H) mm
With Scanner : 399(W) × 546(D) × 352(H) mm
Without Scanner : 3.5kg
Temperature: 10 to 35ºC,
Humidity: 20 to 80%
Print Cartridge (P/N: CA00050-0262) Replacement Cycle : 4,000,000 characters
(
The number of characters may decrease depending on the font selection.)
Specification
D
Printing Area
(Back side)
C
A B