Download Print this page

NEC Video Wall Mount PD02VW MFS 46 55 L Installation And Assembly Manual page 11

Full service video wall mount
Hide thumbs

Advertisement

Open Adapter Brackets
Open adapter brackets (B) by pulling down on front release strap while pulling bottom of display away from wall.
8
NOTE: Once front release strap is pulled, adapter brackets (B) kick stand will engage.
NOTE: Extended position is for service access only. The mount must be closed during normal use and operation.
B
Close Adapter Brackets
Slightly pull display away from wall to release kick stand while pulling down on back release straps on adapter brackets
(B) as shown below. Support the display until the adapter brackets (B) are engaged in the closed position.
NOTE: Once back release strap is pulled, adapter brackets (B) kick stand will disengage.
B
B
B
11 of 12
ISSUED: 02-21-13 SHEET #: 145-9017-1

Advertisement

loading

  Also See for NEC Video Wall Mount PD02VW MFS 46 55 L

  Related Manuals for NEC Video Wall Mount PD02VW MFS 46 55 L

This manual is also suitable for:

Pd02vw mfs 46 55 l