Download Print this page

Cable Management - NEC Video Wall Mount PD02VW MFS 46 55 L Installation And Assembly Manual

Full service video wall mount
Hide thumbs

Advertisement

Cable Management

6
Display cables can be routed through top or bottom of pull-out mount assembly (A).
NOTE: Use mesh sleeve (M) and cable ties (L) for cable management.
NOTE: Cable ties and cable management slots on pull-out mount assembly (A) can be used to secure display
cables.
A
Open and Close Pull Out Mount Assembly
7
Open pull-out mount assembly (A) by releasing locking tab. Push or pull up on locking tab as shown below.
NOTE: Extended position is for service access only. The mount must be closed during normal use and operation.
A
10 of 12
ISSUED: 02-21-13 SHEET #: 145-9017-1

Advertisement

loading

  Also See for NEC Video Wall Mount PD02VW MFS 46 55 L

  Related Manuals for NEC Video Wall Mount PD02VW MFS 46 55 L

This manual is also suitable for:

Pd02vw mfs 46 55 l