Canon VIXIA HF G30 Instruction Manual page 132

Transferring Files to a Computer or FTP Server
Using the virtual keyboard
When you need to enter text for various settings, touch the text field and a virtual keyboard will
appear on the screen. You must use the touch screen to operate the virtual keyboard. The
illustrations below explain the various keys you can use.
132
! Switch between letters and numbers/special characters.
" Change the position of the cursor.
# Delete the character to the cursor's left (backspace).
$ Caps Lock. When the numerical keyboard is displayed, [#%?] switches between
set 1 and set 2 of special characters.
IMPORTANT
• Observe the following precautions when transferring files. Failing to do so may interrupt the transfer
and incomplete files may remain at the transfer destination.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
• If the file transfer is interrupted, select [New files] and perform the file transfer again.
• If incomplete files remain at the transfer destination, check the content and make sure they are safe
to delete before deleting them.
NOTES
• Depending on the access point's settings and capability, it may take some time to transfer files.