Yamaha Tyros3 Release Notes

Explanation of functionality added
in
Changes to version 1.20
This supplementary explanation covers new functionality added in version 1.20.
Version 1.20 adds the setting of the strong WPA/WPA2 security format. It is more secure than the WEP format
adopted in the past.
Related changes:
• The Wireless LAN screen has changed
● Wireless LAN Page
The settings here are necessary only when using a USB wireless LAN adaptor. Make sure to set them to the same set-
tings as that of the Access Point.
You can select the desired item by using the [DATA ENTRY] dial and the [ENTER] button.
Wireless networks
SSID
Channel
Security
Key
To actually apply all settings changed in the Wireless LAN Page, press the [7 ▲▼] (SAVE)
button.
To cancel, press the [8 ▲▼] (CLOSE) button.
• For details on how to check the version, refer to the owner's manual.
• Please check the following website for details on how to update.
http://music.yamaha.com/download/
• Some USB wireless LAN adaptors do not support WPA. For a list of USB wireless LAN adaptors whose compatibility have
been confirmed by Yamaha, refer to the Yamaha website:
http://music.yamaha.com/download/
All illustrations and screens shown in this document are for explanatory purposes, and may differ from what you actually see.
Calls up the access point list. Select the desired access point by using the [B]/[C] buttons
and press the [G] (OK) button.
Determines the SSID setting. (SSID is an identification name for specifying a particular
network over a wireless LAN connection.)
Determines the channel.
Determines the security.
• NONE
• WEP
• WPA-PSK (TKIP)
• WPA-PSK (AES)
• WPA2-PSK (TKIP)
• WPA2-PSK (AES)
Determines the key. This setting must be made when a security setting above (other than
NONE) is enabled.
version 1.20
EN